marți, 13 iulie 2010
Turn your PSP into a Wireless Gamepad
(when prompted to overwrite, simply accept)
2) Now, run Mango's cfg Creator and put the wifi.cfg in
ms0:\PSP\GAME\WiFiController
when prompted to overwrite, accept again
3) Install PPJoy. (run setup.exe in PPJoySetup folder)
4) After it is installed open up your "Control Panel" and click on "Parallel
Port Joysticks".
5) When the window comes up click "Add..." at the bottom. On the next screen
change "Parallel port" to "Virtual joysticks" and then click "Add."
6) It will want to install some drivers so either have it scan automatically
or point it to the directory you installed PPJoy to.
7) After it is done installing, click the "PPJoy Virtual joystick 1" in the
menu and click "Mapping..."
8) Choose "Set a custom mapping for this controller" and click "Next."
9) Set these options for best results.
Axes = 2 (X Axis and Y Axis)
Buttons = 9
POV hats = 1
10) X Axis = Analog 0
Y Axis = Analog 1
11) These buttons are up to you to set. You should leave "Button 1" set to
"nothing" otherwise you may have problems using the Triangle button on
your PSP later.
Button 1 = nothing
Button 2 = Digital 0
Button 3 = Digital 1
Button 4 = Digital 2
Button 5 = Digital 3
Button 6 = Digital 4
Button 7 = Digital 5
Button 8 = Digital 11
Button 9 = Digital 10
12) Directional button POV
North = Digital 6
East = Digital 7
West = Digital 9
South = Digital 8
13) Repeat steps 5 to 12 to add up to 4 joysticks (this is the maximum amount
that WiFiController will support at the moment).
14) Your now almost ready to use your PSP as a wireless gamepad.
run Wifi Server GUI and start up your controllers.
If you are using only one PSP as a game pad, click "Only 1 Player"
If you are using more, then click the buttons of the corresponding PSP.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
****YOU MUST HAVE EACH INSTALLED IN PPJOY FOR THIS TO WORK!****
__________________________________________________________________
Example:
Two players will be playing a game. You will need to start the batch
files for controller 1 and 2. Player 1 will choose Controller 1 from
WiFiController and player 2 will choose Controller 2.
Note:
If the window opens and closes immediately, something went wrong and
you'll need to either contact me or figure it out yourself. However,
make sure you RETRY all the steps before contacting me. Also try
reading over the WiFiController website and the PPJoy website for help.
15) Now start the program on your PSP, choose your connection and your
controller. It should connect to your computer and basically be working.
You'll find out in the next step.
16) Go back to your Control Panel and go to Game Controllers. Click on "PPJoy
Virtual joystick 1" and choose Properties. On the screen that comes up
you should be able to press buttons on the PSP and have them show as
working on the screen. I recommend calibrating the Analog Stick too.
17) Enjoy!
now to use it, just run Wifi Server GUI and start up your controllers, and launch the app in the PSP
Abonați-vă la:
Postare comentarii (Atom)
Niciun comentariu:
Trimiteți un comentariu