marți, 13 iulie 2010
how to replace your cracked psp screen with a brand new one
1. first you need a 300 Phillips screw driver and a flat head screw driver.
2. there's is 5 ( or 3 depending on how you do it) screws you need to unscrew.
3. the 2 screws toward the left in were the battery goes then there's 2 screws by the memory stick
and the last screw is on bottom side of the psp.
4.then you open the you can open the psp by just taking top part of the psp off.
5. then you have to take of the button bar catch with your flat head screw.
6. lift the button catch up and use your flat head screw driver to lift up the button bar catch circuit strip connector
then pull it out then sit down some were.
7.then you need to pry open the LCD catch 1 and 2 with your flat head screw driver.
8. then pry open the LCD catch 2 and 3 on the other side.
9.almost done
10.lift the screen up and use your flat head screw driver and carefully lift open the big circuit strip connector.
11. then very carefully lift open the small circuit strip connector.
NEW SCREEN
12. take the cracked screen or a screen with dead pixels out and replace it. with your new one be careful not to scratch your new psp screen. now reconnect the both circuit strip connector and pop the screen back in. then put the button bar catch back on. then put the the psp face plate back on and screw the screws back in with your Phillips screw driver.
now your done replacing your cracked psp screen with a brand new one made by sharp with no dead
pixels and now you can play your psp a again enjoy
Reply With Quote
Abonați-vă la:
Postare comentarii (Atom)
Niciun comentariu:
Trimiteți un comentariu